Page 1
SAFETY EARMUFFS (HEADBAND AND MOUNTED) WITH COMMUNICATIONS TECHNOLOGY, LEVEL DEPENDENCY TECHNOLOGY, ELECTRICAL AUDIO INPUT THAT ALSO PROVIDES AN ENTERTAINMENT AUDIO FACILITY. EN 352-1:2002 / EN 352-3:2002 / EN 352-4:2001 / EN 352-6:2002 / EN 352-8:2008 Before you operate the product, you must read and understand the safety chapter in the manual. A copy of this manual and the Declaration of Conformity for the product can be found at: documents.jspsafety.com INTRODUCTION AND IMPORTANT INFORMATION ATTENUATION AND CRITERION LEVELS...
Page 2
® controlled by the unit itself. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JSP Ltd is under licence. ® IMPORTANT INFORMATION: These hearing protectors are items of personal protective equipment (PPE) intended to reduce the harmful effects that sound and noise may have on the hearing.
Page 3
The wearer should check correct operation before use. If distortion or failure is detected, the wearer should refer to the manufacturer’s advice for maintenance and the replacement of the battery. Further information is available from JSP Ltd. WARNING: The output of the level dependent circuit of this hearing protector may exceed the external sound level.
Page 4
PRODUCT PARTS OF Sonis Comms: ® Headband or Helmet / Faceshield Mounting Clip Antenna Speaker Connecting Cable (Loom) Battery Release Button Battery Pack Arms / Height Adjustment Inner Foam Plate Outer Cushion Jack Socket Flexible Boom Arm Boom Microphone - Mute / Unmute MATERIAL LISTING FOR HEADBAND Sonis Comms:...
Page 5
BATTERY PACK Battery Release Button Battery Level Indicator (Li-Ion only) PC Input Port and Li-Ion Battery Charging Port CONTROL PACK ® Volume Up Volume Down Power / Multi-Function Menu Button Intercom Menu Button Functions LED Jack Socket Allows connection to a PTT Button 2-way-radio device.
Page 6
MARKINGS AND MEANINGS: (not all markings below will be visible on the product): The European standard The Manufacturer’s EN 352 number for hearing The model reference trademark protection. Regulation 2016/425 Indicates that product Conformity to on personal protective manufacture meets BSI Regulation (EU) equipment, as amended to performance and quality...
Page 7
AAA BATTERY PACK: The AAA battery does not have a charge level guide on the outside. The charge level can be determined by using the JSP Comms App or by fitting the Sonis Comms on your head, switching it on and the Sonis Comms voice will tell you the charge level is either ®...
Page 8
Comms ® unit. The default language is English and can be changed using the JSP configuration tool, JSP COMMS. Supported languages are English, French, German, Spanish, Italian, Russian, Japanese and simplified Chinese. To set the language using the PC app, connect the Sonis(R) Comms headset to your PC using the USB-C cable provided and open the PC configuration tool.
Page 9
Comms can only be done using the either the desktop or mobile apps and is therefore best done ® before fitting the Sonis Comms unit. The default language is English and can be changed using the mobile device app, JSP COMMS. ® Supported languages are English, French, German, Spanish, Italian, Russian, Japanese and simplified Chinese.
Page 10
SET THE LANGUAGE BEFORE FITTING: It is recommended that you set the language for your Sonis Comms using the app before fitting the headset. ® FITTING HEADBAND Sonis Comms: ® WARNING: Please ensure that Sonis Comms is fitted correctly before entering the hazard area. ®...
Page 11
SET THE LANGUAGE BEFORE FITTING: It is recommended that you set the language for your Sonis Comms using the app before fitting the headset. ® FITTING MOUNTED Sonis Comms: ® WARNING: Ensure connecting cable does not present an entanglement hazard. WARNING: Please ensure that the Sonis Comms is fitted correctly before entering the hazard area.
Page 12
• Intercom groups allow up to 15 wearers to communicate using Sonis Comms headsets. ® • To create a group, use the PC configuration tool or JSP Comms mobile app (See pages 7-8). • Groups can also be created on-the-go using Sonis Comms headsets (See page 12).
Page 13
(Bluetooth ® Radio version). Emergency contacts can be set up using the JSP Comms PC and mobile apps. THE BOOM MICROPHONE Rotate the boom microphone down towards the mouth to activate it, and reposition upright to deactivate.
Page 14
CONNECTING TO BLUETOOTH ® MANAGING PHONE CALLS Sonis Comms (Bluetooth® and Radio version) ® connects to mobile phones and portable media players. Connect to Bluetooth® using your device settings. Whilst connecting the headset will flash red and blue and the words, ‘mobile phone pairing’ can be heard. Phone functions can be controlled using the Power Button: Press once to initiate a list then tap...
Page 15
USING THE CARRY CASE CHARGING CABLE POCKET: BATTERY POCKETS: Headband Sonis Comms: Mounted Sonis Comms: ® ® CARRY HANDLE: ATTACHING THE CARRY CASE TO A WAIST BELT: SHOULDER STRAP: THE CLEAR TOP POCKET: Designed for holding the cut-out instructions or a mobile device: SPARE PARTS LIST: CODE Headband Unit (white plates) without Battery Pack, DMC...
Page 16
JSP Ltd will replace defective parts as required at no charge. JSP Ltd’s liability will not exceed the value of the original sales receipt for the device. In the event of valid claims under this warranty JSP Ltd will not be liable for loss of use of any of its products or for any incidental, indirect or consequential cost, expenses or damages incurred or claimed by the purchaser or any other user.
Need help?
Do you have a question about the Sonis comms and is the answer not in the manual?
Questions and answers