Philco PHHG 7000 User Manual page 9

– Air Fry programme – used to activate the hot air fryer programme.
– Roast programme – used to activate the roasting programme.
– Broil programme – used to activate the intensive broiling programme.
– Bake programme – used to activate the baking programme.
– Dehydrate programme – used to activate the drying programme.
– Grill programme – used to activate the grill programme.
– Slow Cook programme – used to activate the slow cook programme.
– Griddle programme – used to switch on the upper and lower heating elements.
– Stew programme – used to activate the drying programme.
– Steam programme – used to activate the steam cooking program.
– Keep Warm programme – used to activate the keep warm program.
– Manual programme – this is an additional program in which you set the cooking time and
temperature according to your personal preferences depending on the food you are preparing.
Press the Manual button and use the Temp and Time buttons to set the temperature and cooking
time – see "Setting the temperature" and "Setting the cooking time" below.
TEMPERATURE SETTING
1. Select the desired programme.
2. Press the Temp button and turn the rotary control to adjust the temperature. Each turn increases/
decreases the temperature by 5°C.
3. If you select the "Grill" programme, press the Temp button and then use the rotary control to select
the temperature: 150°C (LOW) – 175°C (MED) – 205°C (HIGH) – 230°C (MAX). With each turn, the
corresponding grill temperature icon below the rotary control will fl ash.
SETTING THE COOKING TIME
1. Select the desired programme.
2. Press the Time button and use the rotary control to adjust the cooking time. Each turn increases/
decreases the cooking time by 1 minute.
Note:
Temperature and cooking time adjustments do not apply to preheating.
STARTING THE GRILL
1. After selecting the programme, adjusting the temperature and cooking time, press the START/
STOP button. The grill will start and preheat.
2. If you press the START/STOP button while the grill is preheating/food preparation is in progress,
the grill will stop running. Pressing the START/STOP button again will restart the grill.
3. If you need to change the cooking method, press the START/STOP button, select the new
programme, adjust the temperature and cooking time as required, press the START/STOP button
to confi rm and the grill will resume operation at the new setting.
Copyright © 2023, Fast ČR, a. s.
9
EN