Table of Contents
Advertisement
INSTALLATION
Gas Information
Check operation of electric igniters. Check flame characteristics. Flame should be blue with NO
yellow tip.
Yellow flames:
Further adjustments are required.
Yellow Tips on OuterCones
Normal for LP Gas.
Soft Blue Flames:
Normal for Natural Gas.
If the flame is completely or mostly yellow, verify that the regulator is set to the correct fuel. After
adjustment, reset. Some yellow streaking is normal during the initual startup. Allow the unit to
operate 4 - 5 minutes and re-evaulate before making adjustments.
INDUCTION
Advertisement
Table of Contents
