Table of Contents
Advertisement
INSTALLATION
Fastening the Cooktop
• Please use the "cutting size board" (cardboard packed in the box) to outline and cut a hole in the
counter top.
• Remove burners and grids.
• Turn the cooktop over and rest the top side on a cloth.
• Apply the self-adhesive seal "G" as illustrated in fig.14. The tape should be approximately 1 /16
inch from the edge of the frame sides and back
• Slot the cooktop into the unit and position.
• Position the cooktop in the recess and secure by means of the brackets as shown in fig.15 (for 1
3/16" or 1 3/4" thick work top).
Note: Do not use caulking or compound to seal cooktop to countertop. The cooktop must be
removable if service is required.
(;f_
Fig. 15
INDUCTION
Advertisement
Table of Contents
