True Induction TI-1+1B Manual page 19

INSTALLATION
Gas Information
When all connections have been made, make sure all cooktop controls are in the off position and
turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check
for leaks in the system.
GAS BURNERS
Gas flow to the burners is adjusted by turning the knobs which control the valves. Turning the
knob so that the indicator line points to the symbols printed on the panel achieves the following
functions:
OFF-----
*
m------0
�c
LO
When the knob is rotated to the maximum position it will permit rapid boiling of liquids, whereas
the minimum position allows the simmer warming of food or maintaining boiling conditions of
liquids. Left- Maximum, Right- Minimum
•
• To reduce the gas flow to minimum, rotate the knob counter-clockwise to the LOW position.
INDUCTION