Advertisement
Quick Links
Item
Model
40950
SLM250/S
10" Knife Medium-Duty Slicer
40951
SLM300P/S
12" Knife Medium-Duty Slicer
Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this
packaging to ship the equipment if repairs are needed.
40950
Description
Drive
Belt
Operator's Manual
Medium-Duty Electric Slicers
Peak HP
Voltage
1/3
120
2/5
Item No. 26149-1 en
ENGLISH
40951
Amps
Hz
Plug
2.5
60
5-15P
1.8
Rev
7/13/15
Advertisement
Related Manuals for Vollrath SLM300P/S
Summary of Contents for Vollrath SLM300P/S
- Page 1 12” Knife Medium-Duty Slicer Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
-
Page 2: Safety Precautions
afety recautionS unction and urPoSe To ensure safe operation, read the following statements and understand This equipment is intended to be used to slice food products in commercial their meaning. This manual contains safety precautions which are explained foodservice operations only. It is not recommended to be used with bone-in below. - Page 3 Inspect the slicer to verify all components are installed. Confirm seal is in place and in good condition. If components are not in good working order, do no use the slicer. Have the equipment serviced by an authorized Vollrath service agency.
- Page 4 4. Press and release the ON (—) button to resume operation. Reset should be a rare occurrence and should be due to overloading the slicer. Contact a Vollrath authorized repair service center if the switch is activating often during normal use.
- Page 5 ■ If the slicer is not functioning properly do not use. Have the equipment warm water and correctly diluted sanitizing solution. serviced by an authorized Vollrath service agency. NOTICE: Hand wash only. NOTICE: The sanitizer concentration shall comply with Section 4-501.114, Manual and Mechanical Warewashing...
-
Page 6: Maintenance
10. Simultaneously press and hold the sharpening stone buttons for 3-4 seconds. Release the buttons. Every 6 months ■ Have the seal inspected by qualified personal. If the seal is faulty do not use the slicer. Have the equipment serviced by an authorized Vollrath service agency. harPen the nife WARNING Cut and Amputation Hazard. - Page 7 THIS PAGE INTENTIONALLY LEFT BLANK. ’ peratOr anual...
- Page 8 This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses. The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship for a period of one year, except as specifi cally described in our full warranty statement.
Need help?
Do you have a question about the SLM300P/S and is the answer not in the manual?
Questions and answers