Channel Scanning - Baofeng UV-5RM PLUS User Manual

6.2.3 Channel scanning

This function can scan the channels.
a. In channels mode, press
b. You can change the scanning direction with the / keys.
c. Press key to stop scanning.
Note: for Scan mode, see Menu No.21.
6.2.4 Scan CTCSS
The function allows scanning the frequencies with CTCSS tone enabled.
a. In standby mode, press
b. Press key and the scan of CTCSS tones will start.
NOTES: The function cannot be activated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
6.2.5 Scan DCS
This function allows scanning the frequencies with DCS code enabled.
a. In standby mode, press
b. Press key and the scan of DCS codes will start.
NOTES: The function cannot be activated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
6.3 Manual Programming (Channels Memory)
Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The radios features 999 memory channels that each can hold: Receive and transmit frequencies, transmit power, group
signaling information, bandwidth, ANI/ PTT-ID settings and a six character alphanumeric identifier or channel name
Frequency Mode vs. Channel Mode
In standby mode, press [VFO/MR] key to switch between frequency (VFO) mode and channel (MR) mode.
key for more than 2 seconds. The radio will start scanning according to the channel you set.
[1][4], "Scan CTCSS" will appear on the display.
[1][5]; the display will show "Scan DCS".
-22-
1 .