Grandstream Networks GWN7665 Instructions

OVERVIEW
EN
The GWN7665 is a powerful, enterprise-grade Wi-Fi 6E access point, ideal
for small-to-medium sized businesses, multiple floor buildings, residential
settings and commercial locations. It offers tri-band 2x2:2 MU-MIMO with
DL/UL OFDMA technology and a sophisticated internal antenna design
for stronger anti-interference, more stable connection, maximum network
throughput and expanded Wi-Fi coverage range. The GWN7665 is sup-
ported by GWN.Cloud and GWN Manager, Grandstream's cloud and
on-premise Wi-Fi management platform makes managing your network
or several networks across multiple locations easier than ever before. It
also uses a controller-less network management architecture in which
the controller is embedded within the product's web user interface for
easy administration of locally deployed Wi-Fi APs. The GWN7665 is the
ideal Wi-Fi AP for voice-over-Wi-Fi deployments and offers a seamless
connection with Grandstream's Wi-Fi capable IP phones. With support
for advanced QoS, low-latency real-time applications, mesh networks,
captive portals, 384 concurrent clients and dual Gigabit network ports
with PoE+, the GWN7665 is an ideal Wi-Fi access point for business-
grade wireless network deployments with medium- to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to
50 °C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7665 to environments outside of the follow-
ing humidity range: 10-95% RH (non-condensing).
• Do not power cycle your GWN7665 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.
PACKAGE CONTENTS
1x GWN7665 Access Point
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
~1~
1 x Quick Installation Guide
3x M3 NUT
3x Screw (PA 3.5 x 20)
GWN7665 PORTS
Port Description
NET/POE Ethernet RJ45 port (10Mbps /100Mbps /1Gbps
2.5G /2.5Gbps) supporting PoE+.
NET/POE
Ethernet RJ45 port (10Mbps /100Mbps /1Gbps) to your
1G router or another GWN76xx, support PoE+.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7665
GWN7665 can be powered on using PoE+ switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7665.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE+) switch.
Network Port
HARDWARE INSTALLATION
GWN7665 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
3x Screw (PM 3 x 50)
3x Plastic Expansion Bolt
RJ45 Ethernet Cable
to power over Ethernet
(PoE+) Switch.