Sony DVP-NC625 Operating Instructions Manual page 59

Hide thumbs Also See for DVP-NC625:
Table of Contents

Advertisement

• PAUSEMODE(DVD only)
Selects the picture in pause mode.
AUTO
The picture,
including
subjects
that move dynamically,
is
output
with
no jitter. Normally
select
this position.
FRAME
The picture, including subjects
that do not move dynamically,
]s output in high resolution.
• TRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD on which multiple audio formats
(PCM, DTS or Dolby Digital format) are
recorded.
O_FF
No priority given.
t
• When you set the item to "AUTO,"
the language
may change.
The "TRACK
SELECTION"
setting
has higher
priority than the "AUDIO"
settings
in
"LANGUAGE
SETUP" (page 56).
• ffyou
set "DTS" to "OFF" (page 60), the DTS
sound _rack is no_ played even if you se_ "TRACK
SELECTION"
to "AUTO."
• ffPCM,
DTS and Dolby Digital
sound tracks
have [he same nmnber
of channels,
the player
selects PCM, DTS and Dolhy Digilal sou nd tracks
in this order.
• MULTI-DISCRESUME(DVD/VIDEOCD
only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD/VIDEO
CD discs (page 28).
ON
Stores
the resume
settings
in
memory
for up to 6 discs (The
settings
remain
in memory
even
if you select
"OFF.")
OFF
Does not store the resume
settings
in memory.
Playback
restarts
at the resume
point only
for the current
disc in the player.
Settings for the Sound
(AUDIO SETUP)
"AUDIO
SETUP" allows you to set the sound
according
to the playback
and connection
conditions.
Select "AUDIO
SETUP"
in the Setup
Display.
To use the display, see "Using
the
Setup Display"
(page 55).
The default settings are underlined.
AUDIO SfiTUP
• AUDIO ATT (attenuation)
tf the playback
sound is distorted,
set this
item to "ON." The player reduces the audio
output level.
"I_qis function affects the output of the LINE
OUT L/R (AUDIO) jacks.
_IiOFF
Normally, select this position.
Select this when the playback sound
• AUDIO DRC (Dynamic Range Control)
(DVDonly)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms
to "AUDIO
DRC." "I_qis affects the
output from the following
jacks:
- LINE OUT L/R (AUDIO) jacks
- DIGITAL
OUT (COAXIAL)
jack only
when "DOLBY
DIGITAL"
is set to "D-
PCM" (page 60).
STANDARD
Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
==
-ff
•.t, continuod
59

Advertisement

Table of Contents
loading

Table of Contents