Table of Contents
Advertisement
3
Rotate the main command dial to choose the subject speed.
Rotate the main command dial to choose a [Speed] of [1] to
[5]. Choose higher values to restrict subject detection to faster-
moving subjects, lower values to include subjects moving at
slower speeds.
Tip: Size and Speed
Subjects that meet the criteria for [Subject Size] and [Speed] are shown by green boxes in
the motion settings display.
[Speed] is measured as the time taken for the subject to cross the frame horizontally. The
approximate time for each value is listed below. Subjects that are moving too quickly may not
be detected.
-
[1]: About 5 s or less
-
[2]: About 4 s or less
-
[3]: About 3 s or less
-
[4]: About 2 s or less
-
[5]: About 1 s or less
Selecting [1] for both [Subject Size] and [Speed] makes it easier for the camera to detect
subjects of a variety of sizes moving at a variety of speeds. We recommend that you begin
from low values and then gradually raise them while checking the display of green boxes
in the motion settings display or taking test pictures until subject detection functions as
desired.
31
New Menu Item: "Auto Capture"
Advertisement
Table of Contents
