22 INSTALLATION
2
Check for proper installation by grasping the
front edge of the cooktop and carefully
attempting to tilt the range forward.
Test Run
Test the Range Before Use
Check if the range is properly installed and run a
test cycle.
Model LSEL6330*
1
Before using the cooktop for the first time,
clean it with a ceramic cooktop cleaner. This
helps protect the top and makes cleanup
easier.
2
Turn the oven mode knob to the OFF position
to start the test.
3
Turn each knob to the Hi position to check
that the surface heating elements are
working properly. The elements should glow
red and radiate heat, and they should cycle on
and off periodically even when the knob is in
the Hi position. This cycling prevents the
glass-ceramic from being cracked by thermal
shock.
4
Turn the mode knob to Broil and run for at
least 15 minutes, then turn to Bake at 450 °F
and run for at least 1 hour. This will help
remove any oil which might cause smoke and
odors when first using the oven.
NOTE
• Smoke may come out of the range when it is first
used.