Troubleshooting - Briggs & Stratton BS2AC48 Owner's Manual

TROUBLESHOOTING

PROBLEM
Charger doesn't work.
Charger shows defective
mode (LED flashes Red).
Charger doesn't
work. Charger shows
evaluative mode (LED
indicates Red solid ON).
CAUSE
Battery pack or charger
is defective or bad
connection between
the battery pack and
charger.
Battery pack is too hot or
too cold.
12
SOLUTION
1. Try to remove and
reinsert the battery pack
in the charger.
2. Try charging a
different battery pack.
3. Unplug the charger
and wait until the red
LED goes out, then
reconnect the plug to the
power supply.
Allow the battery
pack to reach normal
temperature. Charging
will begin when battery
pack returns to 3°C-47°C
(37°F-117°F).