Troubleshooting - Briggs & Stratton 1761122 Owner's Manual

TROUBLESHOOTING

PROBLEM
Charger doesn't work. Charger
shows defective mode (LED
flashes Red).
Charger doesn't work. Charger
shows evaluative mode (LED
indicates Red solid ON).
CAUSE
Battery pack or charger is
defective or bad connection
between the battery pack and
charger.
Battery pack is too hot or too
cold.
11
SOLUTION
1. Try to remove and reinsert
the battery pack in the charger.
2. Try charging a different
battery pack.
3. Unplug the charger and wait
until the red LED goes out,
then reconnect the plug to the
power supply.
Allow the battery pack to reach
normal temperature. Charging
will begin when battery
pack returns to 3°C-47°C
(37°F-117°F).