Advertisement
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• To remove the Bucket, unlock the top handle by pushing
the button on the lid of Bucket (see picture).
• The button (3) on the lid is a spare part, it can be
replaced by removing screw
• The bucket can only be placed back with the lid mounted
and positioned in the correct way, otherwise the handle
cannot be closed.
• The Inlet filter assy (4) on the front (motor side) of the
Bucket can be removed by pulling the lip at the top
(see picture).
A
(see picture).
A
• The foam in the Inlet filter assy can be cleaned.
By pulling the plastic ring the foam fi lter can be removed
without touching the dirt on the fi lter (see picture).
• The bottom of the Bucket can be removed as shown in
the picture below.
Remark:
The Bucket can be placed back without the bottom, this
will not lead to a safety problem, but all the dust will get
into the bottom housing.
FC9723/09
2-11
Advertisement
