Replace Fuse; Product Information - Philips CED370 - annexe 1 Manual

Replace fuse

If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
36 EN
10 Product
information
Note
Product information is subject to change without
prior notice.
General
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker 4 - 8
impedance
Maximum power 40 W x 4 channels
output
Continuous power 22 W x 4 channels
output (4
Pre-Amp output 2.0 V ( CD play mode;
voltage 1 kHz, 0 dB, 10 k
Subwoofer output 2.0 V (CD play mode,
voltage 61 Hz, 0 dB, 10 k
Aux-in level
Dimensions 178 x 100 x 160 mm
(W x H x D)
Weight (main unit) 2.5 kg
Disc player
System
Frequency response
Signal/noise ratio
Total harmonic
distortion
Channel separation
Video signal format
Video output
10% T.H.D.)
load)
load)
500 mV
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>55dB
NTSC only
1 +/- 0.2V