Husqvarna V554X Operator's Manual page 17

Table of Contents

Advertisement

Available languages

Available languages

Maintenance
Tighten the engine nuts and
screws.
Replace the engine oil.
Check and clean the engine
5
oil cooler fins.
Replace or clean and adjust
the spark plugs.
Replace the engine oil filter.
Replace the air cleaner pri-
6
mary element.
Do a check of the engine
air cleaner secondary ele-
7
ment.
Clean the engine combus-
8
tion chamber.
Do a check of the clearance
9
of the engine valve.
Clean and adjust the engine
valve seating surface.
Replace the engine air
cleaner secondary ele-
11
ment.
To clean the product
CAUTION:
pressure washer or a steam cleaner.
Water can go into bearings and electrical
connections and cause corrosion which
causes damage to the product.
Clean the product immediately after use.
Do not clean hot surfaces such as the engine,
muffler and exhaust system. Wait until the
surfaces are cool, then remove the grass or dirt.
Before you clean with water, clean with a brush.
Remove grass and dirt on and around the
transmission, the transmission air intake, and the
engine.
5
In conditions with dust, cleaning and replacement must be done more frequently.
6
In conditions with dust, cleaning and replacement must be done more frequently.
7
In conditions with dust, cleaning and replacement must be done more frequently.
8
Must be done by approved service agent.
9
Must be done by approved service agent.
10
Must be done by approved service agent.
11
In conditions with dust, cleaning and replacement must be done more frequently.
2375 - 003 - 13.03.2024
Daily mainte-
nance
Before
After
10
Do not use a high-
Do mainte-
Maintenance interval in hours
nance at a
minimum of
1 time each
50
year
Use running water from a hose to clean the
product. Do not use high-pressure.
Do not point the water at electrical components
or bearings. Detergent usually increases the
damage.
Use compressed air to clean the top side of the
mower deck.
Use a water hose to clean below the cutting
deck.
When the product is clean, start the cutting deck
for a short period to remove remaining water.
To clean the engine and the muffler
Keep the engine and muffler free from grass cuttings
and dirt. Grass cuttings soaked in fuel or oil on the
engine can increase the fire risk and the risk that the
100
200
250
300
O
O
O
O
O
O
O
500
O
O
O
O
17

Advertisement

Chapters

Table of Contents
loading

Table of Contents