Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Operator's Manual
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Manual de Operario
Esta máquina puede utilizar gasolina con un contenido
de hasta el 10% de etanol (E10). El uso de una gasolina
TS 354X
que supere el 10% de etanol (E10) anulará la garantía
del producto. the product warranty.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
115 95 68-49 Rev. 1
Por favor lea cuidadosamente y comprenda
English/Spanish
estas intrucciones antes de usar esta maquina.

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Husqvarna TS 354

  • Page 1 Operator’s Manual Gasoline containing up to 10% ethanol (E10) is accept- able for use in this machine. The use of any gasoline ex- ceeding 10% ethanol (E10) will void the product warranty. Manual de Operario Esta máquina puede utilizar gasolina con un contenido de hasta el 10% de etanol (E10).
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Be alert and turn machine off if a child enters the area. WARNING: In order to prevent ac ci den tal •...
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION V. SERVICE SAFE HANDLING OF GASOLINE WARNING! When loading or unloading To avoid personal injury or property damage, use extreme this machine, do not exceed the maximum care in handling gasoline. Gasoline is extremely flammable recommended operation angle of 15°.
  • Page 4: Table Of Contents

    Bluetooth SIG, Inc. and any use of such marks by Husqvarna Consumer Outdoor Products N.A., Inc. is under license. Other trademarks and trade names are those of their respective owners.
  • Page 5: Assembly

    UNASSEMBLED PARTS Slope Sheet Battery Keys (1) Oil Drain Tube (2) Hex Bolts (1) Quick Connect Key(s) (2) Nut Keps Seat (3) Bolt (1) Cup (1) Knob (3) Flat Washer (1) Seat Washer *Installed by Dealer *Brush Guard Kit ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes.
  • Page 6 ASSEMBLY CONNECT BATTERY (See Fig. 1) WARNING: Do not short battery ter mi nals SEAT by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.
  • Page 7 TRANS PORT” in the Operation section of this man u al.) • Reduce tire pressure to PSI shown on tires. ✓ Download Husqvarna Connect App to your mobile CHECK DECK LEVELNESS device. For best cutting results, mower housing should be prop- WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA erly leveled.
  • Page 8: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT...
  • Page 9 OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig. 4 Our tractors conform to the applicable safety standards of the American National Standards Institute.
  • Page 10 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 11 OPERATION TO MOVE FORWARD AND BACKWARD The cutting height range is ap prox i mate ly 1 to 4" (25,4 to 101,6 mm). The heights are measured from the ground to (See Fig. 8) the blade tip with the engine not running. These heights are The direction and speed of movement is controlled by the approximate and may vary depending upon soil conditions, forward and reverse drive pedals.
  • Page 12 OPERATION TO STOP MOWER BLADES TO OPERATE ON HILLS Disengage at tach ment clutch con trol. CAUTION: Do not drive up or down hills with slopes greater than 15° and CAUTION: Do not operate the mower do not drive across any slope. without either the en tire grass catcher, on mowers so equipped, or the deflector chute •...
  • Page 13 OPERATION LED INDICATOR (See Fig. 14) Buzzer Icon Meaning Your tractor has several sensors on board to aid in opera- 5 Beeps Parking Start Fault - Parking tion and help maintain proper health. The LED indicator Brake Brake must be informs the operator about the status of some of those on engaged to start -board sensors.
  • Page 14 OPERATION COLD WEATHER STARTING (50°F/10°C and below) CAUTION: Alcohol blended fuels (called gasohol • When engine starts, slowly push choke control in until or using ethanol or methanol) can attract moisture the engine begins to run smoothly. Continue to push which leads to sep a ra tion and for ma tion of acids the choke control in small steps allowing the engine to during storage.
  • Page 15 OPERATION 7. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake. 8. Drive tractor forward for approximately 5 feet (1,5 m) then backwards for 5 feet (1,5 m). Repeat this driving procedure three times.
  • Page 16: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling...
  • Page 17: Maintenance

    MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor.
  • Page 18 MAINTENANCE V-BELTS LOWER DASH COVER REMOVAL • Raise hood. Check V-belts for deterioration and wear after 100 hours • Remove fastener from lower dash cover. of operation and replace if necessary. The belts are not ad just able. Re place belts if they begin to slip from wear. CAUTION: Remove lower dash cover carefully to ensure cover tabs are not broken.
  • Page 19 MAINTENANCE CLEANING AIR FILTER Your engine will not run properly using a dirty air filter. Ser- • Clean engine, battery, seat, finish, etc. of all foreign vice air cleaner more often under dusty conditions. matter. • Clean debris from steering plate. Debris can restrict CLEAN AIR SCREEN clutch/brake pedal shaft movement, causing belt slip The air screen is over the air intake blower located on top...
  • Page 20 MAINTENANCE DECK WASHOUT PORT (See Fig. 23) Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.
  • Page 21: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Page 22 SERVICE AND ADJUSTMENTS • From right side of mower, first insert 90° end of anti-sway • ATTACH REAR LIFT LINKS (C) - Lift rear corner of bar (S) into hole in transaxle bracket (T), located near mower and position slot in link assembly over pin on left rear tire in front of transaxle.
  • Page 23 SERVICE AND ADJUSTMENTS TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT (See Figs. 34 & 35) IMPORTANT: Deck must be level side-to-side. Ensure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appear- To obtain the best cutting re sults, the mower blades should ance of your lawn and lead you to think the mower is not be adjusted so the front tip is 1/8"...
  • Page 24 SERVICE AND ADJUSTMENTS TO CHECK BRAKE MOWER DRIVE BELT INSTALLATION (See Fig. 37 & 38) NOTE: For ease in installing the deck belt, refer to the If tractor requires more than five (5) feet (1,5 m) to stop at routing decal on the cutting deck. highest speed in high est gear on a level, dry concrete or paved surface, then brake must be serviced.
  • Page 25 SERVICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT TO REMOVE WHEEL (See Fig. 40) (See Fig. 39) • Block up axle securely. • Remove axle cover, retaining ring and washers to allow Park the tractor on level surface. En gage parking brake. wheel removal (rear wheel contains a square key - Do For as sis tance, there is a belt installation guide decal on not lose).
  • Page 26 SERVICE AND ADJUSTMENTS • Reconnect harness to LED light. • Close hood. INTERLOCKS AND RELAYS Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. • Check wiring. WEAK OR DEAD FULLY CHARGED BATTERY BATTERY TO REPLACE FUSE...
  • Page 27: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Page 28: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4.
  • Page 29 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ run when operator department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.
  • Page 31 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 32: Español

    REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Page 33 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles • Mantener la máquina libre de hierba, hojas u otros es- V. SERVICIO combros que pueden tocar el tubo de escape / partes del motor calientes y quemarse. No permitir que el puente MANIPULACIÓN SEGURA DE LA GASOLINA del cortacésped cargue hojas u otros residuos que pu- Para evitar heridas personales o daños a las cosas, poner el...
  • Page 34: Especificaciones Del Producto

    La marca denominativa y los logotipos de Bluetooth® son marcas registradas de Bluetooth SIG, Inc. y cualquier uso de dichas marcas por Husqvarna Consumer Outdoor Products N.A., Inc. está sometido a un acuerdo de licencias. Otras marcas y nombres comerciales pertenecen a sus respectivos propietarios.
  • Page 35: Montaje/Pre Operación

    PIEZAS SIN MONTAR Hoja de pendiente Batería Llaves (1) Tubo de desagüe (2) Perno (1) Accesorio del conexión Llave(s) (2) Tuerca Asiento (3) Perno (1) Arandela de la (1) Manilla (3) Arandela cazoleta (1) Asiento *Instalado por el distribuidor *Juego de cubierta MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío.
  • Page 36 MONTAJE CONEXIÓN DE LA BATERÍA (Vea Fig. 1) ADVERTENCIA: No haga cortocircuito con los ASIENTO terminales de la batería al permitir que una llave de tuerca o cualquier otro objeto entre en contacto con ambos terminales a la misma vez. Antes de ins ta lar la batería remueva las pulseras de metal, los relojes de pulsera de metal, los anillos, etc.
  • Page 37 Reduzca la presión de los neumáticos a la PSI que se indica de este manual). en estos. ✓ Descargue la aplicación de Husqvarna Connect para su dispositivo móvil. REVISIÓN DE LA NIVELACIÓN DEL CONJUNTO AL MISMO TIEMPO QUE APRENDE A COMO USAR SU Para obtener los mejores resultados en el corte, la caja de la TRACTOR, PRESTE ATENCIÓN EXTRA A LOS PUNTOS DE...
  • Page 38: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. MARCHA NEUTRO ALTO BAJO ESTRANGU- RÁPIDO LENTO INTERRUPTOR ATRÁS LACIÓN DE IGNICIÓN MOTOR MOTOR MOTOR EL CIERRE PEDAL DE FRENO DE ALTURA LEVANTA-...
  • Page 39 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Fig.
  • Page 40 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Page 41 OPERACIÓN MOVERSE HACIA ADELANTE Y HACIA ATRÁS La gama de la altura de corte es de aproximadamente 25,4 a 101,6 mm (1 a 4 pulgadas). Las alturas se miden desde el suelo (Vea Fig. 8) a la punta de la cuchilla cuando el motor no está funcionando. La dirección y la velocidad de movimientos están controlados Estas alturas son aproximadas y pueden variar dependiendo de por los pedales de marcha adelante y atrás.
  • Page 42 OPERACIÓN PARA PARAR LAS CUCHILLAS DE LA SEGADORA PARA OPERAR EN CERROS • Desenganche el control del embrague del accesorio. ADVERTENCIA: No maneje hacia arriba o hacia abajo en cerros con pendientes PRECAUCIÓN: No opere la segadora sin, ya sea, el recogedor de césped completo en las sega- su pe rio res a 15°...
  • Page 43 OPERACIÓN INDICADOR DE LUZ LED (CONSULTE LA FIG. 14) Zumbador Ícono Significado El tractor tiene varios sensores integrados para asistir al func- 5 pitidos Freno de Falla de arranque: el freno ionamiento y ayudar a mantenerlo en buen estado. El indicador estaciona- de estacionamiento debe de luz LED informa al operador sobre el estado de algunos de...
  • Page 44 OPERACIÓN ARRANQUE CON TIEMPO FRÍO (50°F/10°C y menos) PRECAUCIÓN: Los combustibles mezclados con al- • Cuando arranque el motor, empuje lentamente el control de cohol (llamados gasohol o que usan etanol o metanol) la estrangulación hacia adentro hasta que el motor empiece pueden atraer la humedad, lo que provoca la separación a funcionar suavemente.
  • Page 45 OPERACIÓN Sentado en el asiento del tractor, empiece el motor. Des pués que este corriendo el motor, mueva el control de es tran gu- la ción media (1/2) velocidad. Quitar el freno de mano. Conduzca su tractor hacia adelante durante aproximadamente cinco pies y entonces hacia marcha atrás cinco pies (150 cm).
  • Page 46: Tabla Del Mantenimiento

    MANTENIMENTO ANTES CADA CADA CADA CADA CADA ALMACEN- PROGRAMA DE MANTENIMIENTO DE CADA TEMP- AMIENTO HORAS HORAS HORAS HORAS ORADA Revisar la operación del freno Revisar la presión de las llantas Verificar la sistemas presencia del operador y sistemas "ROS" Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación...
  • Page 47 MANTENIMENTO TRACTOR PRECAUCIÓN: Usar solamente la hojas de repues- Siempre observe las reglas de seguridad cuando dé mante ni- to aprobada por el fabricante de su cortacésped. mien to. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su OPERACIÓN DEL FRENO cortacésped y anular su garantía.
  • Page 48 MANTENIMENTO CORREAS "V" EXTRACCIÓN DE LA CUBIERTA DEL TABLERO INFERIOR • Levantar la capota. Revise las correas "V" para verificar si existe deterioro y desgaste • Retirar el sujetador de la cubierta del tablero inferior. después de 100 horas de operación y cámbielas si es necesario. Las correas no son ajustables.
  • Page 49 MANTENIMENTO LIMPIEZA FILTRO DEL AIRE Su motor puede sufrir averías y funcionar de manera incorrecta • Limpie todo material extraño del motor, la batería, el asiento, con un filtro del aire sucio. Déle servicio al filtro de aire más a el pulido, etc.
  • Page 50 MANTENIMENTO PUERTO DE LAVADO DE LA CUBIERTA (Vea Fig. 23) La plataforma del tractor está equipada con un puerto de lavado como parte del sistema de lavado de la plataforma. Se debe utilizar después de cada uso. Lleve el tractor a un lugar horizontal y despejado de su césped, lo bastante cerca de una boca de riego como para que llegue la manguera del jardín.
  • Page 51: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA: PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: • Presione el pedal de freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posición desenganchado (DISENGAGED). •...
  • Page 52 SERVICIO Y AJUSTES • Desde el lado derecho de la cortadora de césped, inserte • FIJE LOS BRAZOS DE SUSPENSIÓN LATERALES DE primero el extremo en 90° de la barra antibalanceo (S) dentro LA CORTADORA (A) AL CHASIS - Ubique el orificio del del agujero de la escuadra de transeje (T), ubicado cerca de brazo encima de la clavija (B) que hay en la parte exterior la rueda trasera izquierda adelante del transeje.
  • Page 53 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA AJUSTE DE DELANTE A ATRÁS (Vea Fig. 34 y 35) Asegúrese de que los neumáticos estén inflados a la PSI que se IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. indica en estos.
  • Page 54 SERVICIO Y AJUSTES CONTROLAR Y AJUSTAR EL FRENO INSTALACIÓN DE LA CORREA DE TRANSMISIÓN DEL COR- TACÉSPED (consulte las imágenes 37 y 38) Si el tractor exige más de 1,5 m (cinco (5) pies) para pararse a una velocidad más alta en el cambio más alto en una superficie TENGA EN CUENTA: Para facilitar la instalación de la cinta de nivelada de hormigón seco o pavimentada, entonces se debe la plataforma, consulte la etiqueta sobre la ruta que está...
  • Page 55 SERVICIO Y AJUSTES PARA REMOVER LAS RUEDAS PARA HACER PARA CAMBIAR LA CORREA DE IMPULSIÓN DE MOVIMIENTO (Vea Fig. 39) REPARACIONES (Vea Fig. 40) Estacione el tractor en una superficie nivelada. Ponga el freno • Bloquee el eje en forma segura. de mano.
  • Page 56 SERVICIO Y AJUSTES • Vuelva a conectar el cableado al faro LED. • Cierre el capó. ENTRECIERRE Y RELÉ El alambrado suelto o dañado puede producir el mal fun cio- na mien to de su trac tor, o que deje de funcionar, o le impida el arrancar.
  • Page 57: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edificio tales como el carburador, el filtro del com bus ti ble, la manguera...
  • Page 58: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor sin la “ESTRANGULACIÓN” (CHOKE) Vea “PARA HACER ARRANCAR EL MOTOR” en la sec- adecuada. ción de operación. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala.
  • Page 59 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si operador –seguridad fallado. no están correctas, pongase en contacto con un centro funcionando cuando de servicio cualificado. el operador se baja del asiento con el PRECAUCIÓN: NO opere la máquina sino hasta haber...
  • Page 61 Este dispositivo cumple con el Segmento 15 de las Reglas de FCC. El funcionamiento está sujeto a las siguientes dos condiciones: 1. Este dispositivo no causará una interferencia dañina, y 2. Este dispositivo debe aceptar cualquier interferencia que reciba, inclusive una interferencia que puede causar una operación no deseada.
  • Page 64 6.25.18 JSE/CL Printed in U.S.A.

This manual is also suitable for:

Ts 354x

Table of Contents