On-Screen Display (Osd) - Panasonic Omnivision PV-C1322 Operating Instructions Manual

On-Screen Display (OSL
Blue Screen Display VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Channel Caption
(See page 28.)
Function Status
Current Time
Counter
7 REC 12:00PM ABC
Rec Time 0:25 0:12:34
Remaining
{OTR mode only,
see page 12.)
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to "OFF" (see
page 27), the screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channe} number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
08
ABC
Tape Speed
These displays will alert you to a missed
Warning and Instruction Displays operation or provide further instructions.
Caution
PLEASE SET CLOCK BEFORE
PROGRAMMING
* If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
CHECK CASSETTE RECORD TAB ¢ If you press REC, and a cassette is inserted with
no record tab...
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
* If you press STOP during a Timer Recording...
NO CASSETTE
PLEASE INSERT A CASSETTE
* If you press PLAY, FF, REW, or REC without a
cassette inserted...
* If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
PLEASE PREPARE FOR TIMER REC
* If head cleaning becomes necessary while playing
back a tape...
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
« If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
VCR LOCK ACTIVATED
32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com