Wv Tang Poaturigs Iicscdiccscssiandscostycasscacccssninvacsesiuusenvaavioncveatensdesees - Panasonic Omnivision PV-C1322 Operating Instructions Manual

TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
Press PROG to display SET PROGRAM
screen.
1)Press AY to select
"ON TIMER."
2)Press P to display
ON TIMER screen.
1) Press AV to select
desired settings.
2) Press & to set the
ON-TIMER TIME or
ON-TIMER mode.
* Make sure a tape is
inserted if Playback
mode is selected.
(7CHO2—CHOS---CH1 25 * See "FM Radio" on
CHo1 pay pages 20 and 21 for
\oeMg—FMa-- Mie? _—«*INStructions on how to
preset FM stations.
ELECT HOU
SELECT :& ¥
SET >
END :PROG
¢ ON-TIMER mode
selection order
ON TIMER Press AV to select
§:00AM CHO8
ALARM
"ON" or
ALARM: ON ABC "OFF."
CANCEL : ADD /OLT
ia
SET
END PROG
rs
When "ON" is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use AV and <> to move back and correct.
5 Press PROG to set ON TIMER.
* "ON TIMER SET?" is displayed.
* ON TIMER Indicator lights on the unit.
IF Ready Check List
0 The clock is set to correct time.
CHAY ONTIMER
indicator
Note J
To Cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
"ON TIMER END" briefly appears on-screen.
If no button on the remote or unit
{including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
bc aae For assistance, please call : 1-800-211-PANA(7262) or send e-mail fo : consumerproducts @ panasonic.com