Panasonic Omnivision PV-C1322 Operating Instructions Manual page 22

imer
Recording
You can set up to 8 programs to be recorded while
you are away.
Press PROG to display SET PROGRAM
screen.
2 SET PROGRAM 1) Press AY to select
" TIMER
| PROGRAMMING.
2) Press b to display
Screen.
* If a program is already in
memory, press AY, and
» to select an unused
program number.
Press AV to select
and > or «to set the
recording DATE.
* 1-31 = One time
* DAILY = MON-FRI
* WEEKLY SUN-SAT
= Same time once a week
3
GOSS STC «m DATE
SELECT :&
END :PROG/ACT LON
|
Example 8—9-31— 1— 2-6
Today's—— 7 SELECTA / V Selection Order DAILY
Date Une reds WEEKLY, WEEKLY
(SAT) (MON) — (SUN)
Repeat step 3 to set:
* start time, stop time
* Channel (or LINE for outside source)
* Speed (SP, LP, SLP)
Press PROG (or
ACTION) to end the
program.
CANCEL : ADD/DLT
To Enter More Programs,
ENTER :»
and > to set a blank
program number, and
then repeat step 3.
Press PROG twice (or ACTION)
to exit this mode.
* If you're using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
* PROG TIMER indicator lights on the unit.
22 For assistance, please call ; 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com
IV Ready Check List
O All connections are made.
O Your unit is plugged in.
O The clock is set to correct time,
O The tape is long enough.
L) The record tab is in place.
PROGRAM TIMER indicator
Timer Recording Using
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 11.)
VOL STOP/EJECT REWE)
006090 (-][-]
* ACTION +»
1 Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
2 Press AV + - to select "VCR"
and STOP/EJECT and REW
VES to display SET UP
VCR screen.
8 Press AV to select "TIMER
PROGRAM" and + to display
the TIMER PROGRAM screen.
4 Repeat main steps 3 - 5.