Panasonic Omnivision PV-C1322 Operating Instructions Manual page 16

TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
Press PROG to display SET PROGRAM
screen.
1)Press AY to select
"ON TIMER."
2)Press b to display
ON TIMER screen.
1) Press AV to select
desired settings.
2) Press » to set the
ON-TIMER TIME or
ON-TIMER mode.
* Make sure a tape is
inserted if Playback
mode is selected.
(C02 — CH03-—CH125- * See "FM Radio" on
CHO1 p.v Pages 20 and 21 for
UrMs—rMs--«rui-——A Instructions on how to
preset FM stations.
ELECT HOUH
SELECT :4 Y
SET >
END :PROG
* ON-TIMER mode
selection order
ON TIMER Press AV to select
6:004M CHOS
ALARM
"ON" or
ALARM: ON ABC "OFF."
CANCEL : ADD /OLT
lA Y
SET
END : PROG
rs
When "ON" is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use AV and « > to move back and correct.
5 Press PROG to set ON TIMER.
* "ON TIMER SET" is displayed.
* ON TIMER Indicator lights on the unit.
ready Check List
C] The clock is set to correct time.
CHAY ONTIMER
indicator
Note J
To Cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
"ON TIMER END" briefly appears on-screen.
If no button on the remote or unit
{including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com