Table of Contents
Advertisement
Malfunction
device pauses,
but the drum
running.
wrinkling.
and program
broken.
Program does not start.
The program duration
changes during
drying.
Cause and Troubleshooting
Cooling process active.
No error - no action required.
▶
The load quantity is too high.
Pay attention to the maximum load of the
▶
→ "Programs", Page 24 .
The laundry is left in the drum for too long after drying.
Remove the laundry from the drum immediately after
1.
drying.
Spread out the items to let them cool.
2.
Inappropriate program set for the type of fabric.
Set the appropriate program for the type of fabric.
▶
→ "Programs", Page 24
Easy care textiles dried too long.
→
"Change Drying Target", Page 23 .
▶
→ "Adjust drying target", Page 23 .
▶
Anti-crease not activated.
Activate the anti-crease program.
▶
→ "Buttons", Page 21
Condensate tank filled.
→ "Emptying the condensate container", page 31 .
1.
→ "Push in the condensate container", page
2.
32 .
→ "Starting the program", Page 29 .
3.
The filter in the condensation tank is dirty.
→
"Clean the filter in the condensation
▶
container.", page 41 .
Child lock is activated.
→ "Deactivate child lock", page 32
▶
Start/Pause//Départ/Pausewas not pressed.
PressStart/Pause//Départ/Pause .
▶
No program set.
→ "Set program", page 28 .
1.
→ "Starting the program", Page 29 .
2.
The program sequence is electronically optimized. This
may lead to changes in the program duration.
No error - no action required.
▶
TroubleshootingNL
43
Advertisement
Table of Contents
