Download Print this page

Viking RescYou Prime Quick Start Manual page 2

Lifejacket

Advertisement

Available languages

Available languages

EN
The VIKING RescYou
TM
automatically inflatable lifejacket.
The lifejackets conform to the Regulation (EU)
2016/425 of the European Parliament and the
Council. The lifejacket complies with EN ISO
12402-2:2020. The lifejacket is type examined by
FORCE Certification A/S, NB0200, Park Allé 345,
Brøndby, Denmark.
The VIKING RescYou
TM
has a single compartment buoyancy chamber
which when fully inflated provides buoyancy of
min. 275 Newton. The lifejacket is intended for
persons weighing from 43 kg up to more than
100 kg with a chest measurement of 60-175 cm.
Production date as well as serial number are
placed on the ID label on the buoyancy chamber.
The VIKING RescYou
TM
has an automatic Halkey Robert
lifejacket uses a 60 g CO2 cylinder.
Gas cylinders are dangerous goods, and must be
kept away from children and not misused.
3. INSTRUCTION FOR USE
1
2
Close the
Put on like a
1
2
front buckle.
coat
1. Put on like a jacket.
2. Close the front buckle.
4
3. Adjust the waist straps on the back.
4. Pass crotch straps between legs and fasten buckles. Adjust the straps.
5. The lifejacket inflates automatically after water immersion or can be manually inflated with
a strong pull of the release handle. The light is automatically activated. Blow the whistle for
signalling.
Remember to check that the buckles are closed and tighten adjustments before entering the water.
Pass crotch
straps between
legs and
2
fasten buckles.
VIKING RESCYOU
Prime (PV9280) is an
Prime (PV9280) lifejacket
Prime (PV9280) lifejacket
inflator. The
®
3
Adjust the
3
waist straps
on the back.
5
The lifejacket
is manually
inflated by a
strong pull of
PRIME LIFEJACKET (PV9280)
NOTE:
The bobbin in the Halkey Roberts
be replaced annually from first use. Do not use
bobbins that are more than four years old. The
production date is printed on the bobbin itself.
2. TRAINING BEFORE USE
Train yourself in the use of the device, and test
it in a swimming pool or another safe condition
before use. Inflate the lifejacket orally using the
oral inflation tube. Wear your normal clothes
when training. After testing, the buoyancy must
be emptied thoroughly of air.
1
Put on like a
coat
4
Pass crotch
4
straps between
legs and
fasten buckles.
Adjust the
straps.
inflator must
®
2
3
Close the
Adjust the
front buckle.
waist straps
on the back.
5
The lifejacket
5
is manually
inflated by a
strong pull of
the release
handle.

Advertisement

loading

This manual is also suitable for:

Pv9280