Operation; Start Preparation; To Start - NUequipment CRP40 Series Owner's Manual

2. OPERATION

2.1 Start Preparation

Before starting the engine, check the following:
Fuel level – the tank should be at least half full.

Motor oil level.

Air filter.

Fuel lines for leaks.

External screw connections for tightness.


2.2 To Start

2.2.1 Starting the petrol engine
Open the fuel tap (a1).

Cold start: Close the choke (d2).

Warm start: Open the choke (d1).
Note: The engine is hand warm or hotter with warm start.
Set the engine switch to "ON" (b2).

Push the throttle lever to the left (c2).

Pull out the starter rope (e) until compression resistance can be felt and then let it roll back in

again.
Pull the starter rope with force, but not suddenly.

The engine starts.
Let starter rope slowly roll back in.

Open the choke while the engine is warming up.

Open the throttle lever completely for operation (c1).

10