Disconnecting The Drive - Kanguru Fire Flash User Manual

Kanguru Fire Flash
If the drive does not appear on your system, please contact Kanguru
Solutions' Technical Support for troubleshooting.
4. The Kanguru Fire Flash operates just as any other removable drive would
on your operating system. To begin using the drive, double click on the
drive icon to view the drive contents. While the drive is in use, a Blue LED
indicates a READ connection and a Red LED indicates the drive is
transferring data.
CAUTION! Do not remove the Kanguru Fire Flash drive during data
transfer or data loss may occur. See the section below for proper removal
instructions.

Disconnecting the Drive:

DO NOT remove the drive during data transfer. If the LED is Red, then the drive
is still transferring data.
Mac users: Drag the Kanguru Fire Flash drive icon to the trash before removing
the drive from the system.
Windows Me/2000/XP users: Click on the green Remove Hardware icon on the
right side of the taskbar and select the Kanguru Fire Flash to safely remove the
drive.
NOTE: If you do not properly remove the drive from your system, then you may
have to reboot your computer in order for the drive to be recognized again.
Windows 98SE users: Windows 98SE does not have a drive removal utility, so
you can simply pull the drive out of the FireWire port to remove is from the
operating system.
- 8 -