Tuning Operations - Yamaha TX-10MKII Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Turn the power on.
2
Select the reception band confirming it on the display.
FM/AM
3
TUNING
MODE
AUTO/
MAN'L MONO
4
If "PRESET" is being illuminated on the display, press
the KEY MODE/EDIT button to turn it off.
KEY MODE
PRESET

TUNING OPERATIONS

NATURAL SOUND AM/FM STEREO TUNER TX–10MK
POWER
RDS MODE PTY SEEK
/FREQ
MODE
1
POWER
or
AUTO
/EDIT
II
PRESET STATIONS
DOWN
EON KEY MODE MEMORY TUNING FM/AM A/B/C/D/E
/EDIT MODE
START MAN'L/ AUTO/
AUTO FM MAN'L MONO
TUNING
PTY SELECTOR
4 3 2
5
Tune to a desired station.
To tune to a higher frequency, press the UP button
once. To tune to a lower frequency, press the DOWN
button once.
6
If the station where tuning search stopped is not the
desired one, press again.
* If the tuning search does not stop at the desired
station (because the signals of the station are weak),
change to the MANUAL TUNING method as
described on the following page.
UP
5, 6
PRESET STATIONS
DOWN UP
TUNING
PTY SELECTOR
PRESET STATIONS
DOWN UP
TUNING
PTY SELECTOR
9