Tuning Operations - Yamaha TX-480 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
* Parts in shaded area are (
present on TX-580RDS only.
1
2
Select the reception band while watching the display.
TX-480, TX-580RDS
FM/AM
TX-480L
FM/AM/LW
3
TUNING MODE
AUTO/MAN'L MONO

TUNING OPERATIONS

2 3
)
POWER
FM or AM
FM MW
or
,
AUTO TUNING
4
Tune to a desired station.
To tune to a higher frequency, slightly turn the control
to the right. To tune to a lower frequency, slightly turn
the control to the left.
5
If the station where tuning search stopped is not the
desired one, turn again.
LW
* If the tuning search does not stop at the desired
station, change to the MANUAL TUNING method as
described on the following page.
4, 5
TUNING
TUNING
7