Preset Tuning - Yamaha TX-10MKII Owner's Manual

MANUAL PRESET TUNING
This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by only
selecting the preset station number where it is stored. Up to 40 stations (8 stations x 5 groups) can be stored.
To store stations
1
Tune to a desired station.
(Refer to page 9–10 for tuning procedure.)
2
Confirm that "PRESET" is illuminated on the display. If
not, press the KEY MODE/EDIT button to turn it on.
3
MEMORY
MAN'L/
AUTO FM
4
Select a desired group (A – E) of preset stations
confirming it on the display.
A/B/C/D/E

PRESET TUNING

NATURAL SOUND AM/FM STEREO TUNER TX–10MK II
POWER
RDS MODE PTY SEEK
/FREQ
MODE
KEY MODE
/EDIT
MEMO
Flashes on and off
for about 5 seconds.
PRESET
PRESET STATIONS
DOWN
EON KEY MODE MEMORY TUNING FM/AM A/B/C/D/E
/EDIT MODE
START MAN'L/ AUTO/
AUTO FM MAN'L MONO
TUNING
PTY SELECTOR
2 3, 6 4 5
5
Select a preset station number (1 to 8) where you want
to program the station while confirming it on the display
before "MEMO" goes off from the display.
6
MEMORY
MAN'L/
AUTO FM
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to preset station numbers
on other groups in the same way by selecting other groups
in step 4.
UP
PRESET STATIONS
DOWN UP
TUNING
PTY SELECTOR
PRESET
Shows the displayed station
has been programmed to A1.
AUTO ST
MHz
11