Preset Tuning - Yamaha TX-670RDS Owner's Manual

MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can
select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be
stored.
To store stations
1
Tune to a desired station.
(Refer to pages 7–8 for tuning procedure.)
2
Select a desired page (A – E) of preset station buttons
while watching the display.
A/B/C/D/E
3
MEMORY
MAN'L/AUTO FM
4
Press a preset station button before "MEMORY"
goes off from the display.
A/B/C/D/E 1 2
FM
Shows the displayed station has been
programmed to A1.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.

PRESET TUNING

3 2,
FM
FM
MEMORY
Flashes on and off
for about 5 seconds.
PRESET STATIONS
3 4 5 6 7 8
STEREO
MHz
WIDE 0 50
AUTO TUNING
1 1 4, 2 2
(Preset station buttons)
To recall a preset station
1 1
Select the page of preset station buttons.
A/B/C/D/E
2 2
A/B/C/D/E
Select the desired preset station button.
Notes
A new setting can be programmed in place of the former
one.
For FM reception, the settings of the MODE, BLEND and
IF MODE buttons are stored along with the station
frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
100
power plug is disconnected from the AC outlet for more than
1 year.
For using an external timer
When making timer setting by using an external timer, store
the station to be called onto A1, and be sure to turn the power
off while the preset station on A1 is being called.
PRESET STATIONS
1 2 3 4 5 6
FM
7 8
9