Yamaha RX-V650 Owner's Manual page 32

AUTO SETUP
If a warning screen appears
1
Press j / i to display detailed information
about each warning.
For details about each message, see page 29.
WARNING:W-1
<OUT OF PHASE>
Reverse Channel
FL
--
--
--
--
[<]/[>]:Select
[SELECT]:Return
y
Warnings let you know about potential problems detected
during auto setup. Warnings will not cancel the auto setup.
2
When you are finished, press SELECT.
The RESULT:EXIT screen appears.
3
Press u / d to select RESULT LIST, then
press SELECT.
RESULT:EXIT
WARNING LIST
. RESULT LIST
)SET
[ ]/[ ]:Up/Down
[SELECT]:Enter
The RESULT:WIRING screen appears.
RESULT:WIRING
FRONT L;;;;;;;OK
[<]/[>]:Select
[SELECT]:Return
Continue from step 8 on page 27 to display
each result.
Notes
• If you change speakers, speaker positions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
• If SWFR PHASE:REV appears in RESULT:WIRING, the SET
MENU "SUBWOOFER PHASE" parameter is automatically
set to REVERSE (see page 55).
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
28
FR
--
--
--
CANCEL