Yamaha RX-V650 Owner's Manual page 60

Yamaha rx-v650: owners manual
Hide thumbs Also See for RX-V650:
Table of Contents

Advertisement

SET MENU
Center graphic equalizer
Use this feature to adjust the built-in 5-band graphic
equalizer for the center channel so that the tonal quality of
the center speaker matches that of the front speakers.
You can make adjustments listening to the currently
selected source component or a test tone.
You can adjust 5 frequency bands: 100Hz, 300Hz, 1kHz,
3kHz, 10kHz
Choices: –6 to +6 dB
D)CENTER GEQ
. TEST
100Hz
300Hz
1kHz
3kHz
10kHz
[ ]/[ ]:Up/Down
[<]/[>]:Adjust
• Select ON to output test tones from the front left and
center speakers, and adjust the tonal quality of the
center speaker.
• Select OFF to stop the test tone and output the
currently selected source component.
• Press u / d to select a frequency band.
• Press j / i to adjust the selected frequency band.
Low-frequency effect level
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries low-
frequency special effects which are only added to certain
scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Choices: –20 to 0 dB
E)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
[ ]/[ ]:Up/Down
[<]/[>]:Adjust
Speaker SPEAKER
Select to adjust the speaker LFE level.
Headphone HEADPHONE
Select to adjust the headphone LFE level.
Note
Depending on the settings of "LFE LEVEL
not be output from the SUB WOOFER OUTPUT jack.
56
D)CENTER GEQ
)OFF
ON
-
+
0dB
0dB
0dB
0dB
0dB
E)LFE LEVEL
"
, some signals may
Dynamic range
Use to select the amount of dynamic range compression to
be applied to your speakers or headphones. This setting is
effective only when the unit is decoding Dolby Digital and
DTS signals.
Choices: MIN (minimum), STD (standard), MAX
(maximum)
F)DYNAMIC RANGE
. SP: MIN STD)MAX
HP: MIN STD)MAX
[ ]/[ ]:Up/Down
[<]/[>]:Select
Speaker SP
Select to adjust the speaker compression.
Headphone HP
Select to adjust the headphone compression.
• Select MIN if you regularly listen at low volume levels.
• Select STD for general use.
• Select MAX to preserve the greatest amount of
dynamic range.
Audio set
G)AUDIO SET
Use to customize this units overall audio settings.
G)AUDIO SET
. AUDIO MUTE;;MUTE
AUDIO DELAY;;0ms
DIALG.LIFT;;;OFF
[ ]/[ ]:Up/Down
[<]/[>]:Selet
Audio mute AUDIO MUTE
Use to adjust how much the mute function reduces the
output volume.
Choices: MUTE, –20 dB
• Select MUTE to completely halt all output of sound.
• Select –20 dB to reduce the current volume by 20 dB.
Audio delay AUDIO DELAY
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices: 0 to 160 mS
F)DYNAMIC RANGE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents