Operation; Adding Fuel - Toro 74760 Operator's Manual

Hide thumbs Also See for 74760:
Table of Contents

Advertisement

Figure 8
1. Hour meter location behind the seat

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.

Adding Fuel

For best results, use only clean, fresh (less than
30 days old), unleaded gasoline with an octane
rating of 87 or higher ((R+M)/2 rating method).
Ethanol: Gasoline with up to 10% ethanol
g027869
(gasohol) or 15% MTBE (methyl tertiary butyl
ether) by volume is acceptable. Ethanol and
MTBE are not the same. Gasoline with 15%
ethanol (E15) by volume is not approved for use.
Never use gasoline that contains more than
10% ethanol by volume, such as E15 (contains
15% ethanol), E20 (contains 20% ethanol), or E85
(contains up to 85% ethanol ). Using unapproved
gasoline may cause performance problems and/or
engine damage which may not be covered under
warranty.
Do not use gasoline containing methanol.
Do not store fuel either in the fuel tank or fuel
containers over the winter unless a fuel stabilizer
is used.
Do not add oil to gasoline.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter mx 4250

Table of Contents