Valcom VL550M-F Manual page 3

Pressing the button continuously for greater
than 20 seconds will perform a hard reset on the
VL550F. All of the configuration items
(including the password) will be reset to factory
default settings.
Figure 1. Network Connections
Setup
Information specific to your application will need
to be programmed into the VL550F using a
computer. The PC used for the programming
should be connected to the same subnet as the
display. Setup will be done using the IP
Solutions Setup Tool. Download the latest
version of the free IP Solution Setup Tool from
Valcom website at
www.valcom.com/vipsetuptool.
The VL550F audio output can be generated
from any Valcom IP Paging source, such as the
VIP-201A SIP Paging Server or a VIP-811A
Network Station Port. Message displays are
programmed and delivered by a Valcom
Engineered Solutions VE6025 Application
Server. Contact Valcom Engineered Solutions
for details on the VE6025 Application Server.
TECHNICAL ASSISTANCE
Assistance is available from the factory when
problems are encountered. Call (540) 563-2000
and press 1 for Technical Support or visit our
website at http://www.valcom.com.
Valcom, Inc. equipment is not field repairable.
Valcom maintains service facilities in Roanoke,
VA. Should repairs be necessary, attach a tag
to the unit clearly stating company name,
address, phone number, contact person, and
the nature of the problem. Send the unit to:
WARRANTY
Warranty information may be found on our
website at www.valcom.com/warranty.
Figure 2. Mounting Diagram
3
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
947592