Valcom VL580 Manual

INTRODUCTION
The VL580 IP Large Display provides highly
visible message output over an Ethernet
network. Text messages are created and
delivered from a Valcom Application Server.
SPECIFICATIONS
Features

Easy to read, high visibility

Font and color options

Power over Ethernet (PoE+) 802.3at
compatible

Display can operate as a clock or provide
other message during idle periods

Relay connection for optional equipment

Audio Line-level output connection
Dimensions / Weight
 80.75" W x 12.13" H x 3.0" D
(205.10cm W x 30.81cm H x 7.62cm D)
 Weight: 42 lbs (19.05kg)
Nominal Power Requirements
802.3at (PoE+)
Environment
Temperature:
Humidity:
10ft max distance power washing
2000 to 3100 psi, 25 degree nozzle
These products are intended for use with a UL
Listed power source marked "Class 2" or "LPS"
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
VL580
IP LARGE DISPLAY
Class 4
- 20° to +50° C
Direct rain,
1
Precautionary Designations
:

WARNING To Reduce The Risk Of Fire
Or Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.

AVERTISSEMENT: Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système
à la pluie ou à l'humidité.

Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall
be placed on the apparatus.

L'appareil ne doit pas être exposé à des
égouttements et éclaboussures et
aucun Objet Rempli de liquide, comme
vase, ne doit être placé sur l'appareil.
FCC Information
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
one's own expense.
Issue 2
947600