Preset Tuning; Manual Preset Tuning - Yamaha RX-V10MKII Owner's Manual

Manual preset tuning

This unit can store station frequencies selected by the tuning operation. With this function, you can recall any desired station only by
selecting the preset station number. Up to 40 stations (8 stations x 5 groups) can be stored.
To store stations
1
Tune in to a station.
(Refer to the previous page for the tuning procedure.)
2
MEMORY
MAN'L/AUTO FM
3
Select a group (A to E) of preset stations before the
"MEMO" indicator goes off. The group will appear on the
display.
A/B/C/D/E
4
Select a preset station number (1 to 8) where you want
to program the station before the "MEMO" indicator goes
off.
5
Press the MEMORY button
before the "MEMO" indicator
goes off.
PRESET
FM
Shows the displayed station has been
programmed to A1.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to preset station numbers
of other groups in the same way by selecting other groups
in step 3.
28

PRESET TUNING

NATURAL SOUND AV RECEIVER RX–V10MK
STANDBY/ON
PHONES SPEAKERS
ON OFF
3, 1 1
MEMO PRESET
AUTO
Flashes on and off for
about 5 seconds.
MEMO PRESET
AUTO
PRESET STATIONS
TUNING
MEMORY
MAN'L/AUTO FM
MHz
0
INPUT
DVD-LD/VCR/V-AUX/TAPE•MD/CD/TUNER/PHONO
6CH/2CH
PTY SELECTOR
PRESET STATIONS
TUNING
RDS MODE / FREQ EON A / B / C / D / E KEY MODE BASS TREBLE
0
EDIT
TUNING CENTER
PTY SEEK FM / AM MODE MEMORY MODE PROGRAM
– + –
MODE START AUTO / MAN'L MONO MAN'L / AUTO FM
2, 5
4, 3 3
To recall a preset station
1 1
Select the group of preset stations.
2 2
"PRESET" must be illuminated on the display to recall
preset stations. If necessary, press the KEY MODE
button.
3 3
Select the preset station number.
Notes
•
A new setting can be programmed in place of the former
one.
•
For presets, the setting of the reception mode (stereo or
l00
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if this unit is set to the standby mode or
the power plug is disconnected from the AC outlet or the
power is cut due to a temporary power failure. If, however,
the power is cut for more than one week, the memory may be
deleted. If so, it can be re-programmed by simply following
the PRESET TUNING steps.
VOLUME
0 I0
BALANCE
0
+
L R
CINEMA DSP
2 2
A/B/C/D/E
KEY MODE
EDIT
PRESET STATIONS
TUNING
PRESET