Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JANSKA RHI-3086
Summary of Contents for JANSKA RHI-3086
- Page 1 S W E D E N ISLAND-MOUNT RANGE HOOD Model No: RHI-3086 (30in) USER MANUAL Your satisfaction is guaranteed. If you are not completely satisfied with our Island-Mount Range Hood, please let us know. We’ll help make it work for you, or we’ll refund your money.
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS___________________________________________ INSTALLATION REQUIREMENTS _______________________________________________ Parts Supplied _________________________________________________________ Location Requirements __________________________________________________ Ventilation Requirements ________________________________________________ Electrical Requirements _________________________________________________ INSTALLATION INSTRUCTIONS ________________________________________________ Prepare Location _______________________________________________________ Venting Methods _______________________________________________________ Install the Range Hood _________________________________________________ RANGE HOOD USE __________________________________________________________ Range Hood Controls __________________________________________________ Operating the Range Hood_______________________________________________ RANGE HOOD CARE ________________________________________________________ Cleaning &... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, READ THE FOLLOWING: • Use this unit only in the manner intended by the manufacturer. • Make sure that the voltage indicated on the rating plate of the appliance corresponds to your outlet voltage. - Page 4 • Never leave cooking elements unattended at high settings. Boil-overs can cause smoke and grease to spill over that may ignite. Heat oils slowly on low or medium settings. • Always turn the hood ON when cooking at high heat or when flambéing food. •...
-
Page 5: Installation Requirements
INSTALLATION REQUIREMENTS PARTS SUPPLIED: Frame Screw Range Hood Support Extension Screw x 32 Upper Exhaust Duct Cover x 1 Support Extension Nut x 32 Hood Mounting Bolt Lower Exhaust Duct Cover x 1 Hood Mounting Nut Upper Support Upper Support Frame x 1 Frame Bolt Hex Key... -
Page 6: Location Requirements
PRIOR TO INSTALLATION: • READ ALL INSTRUCTIONS PRIOR TO INSTALLATION. • Unpack range hood and ensure all listed parts are in the box. • It is recommended for the vent system to be installed before hood is installed. • Before making cutouts, make sure there is proper clearance within the ceiling for the exhaust vent. - Page 7 HEIGHT AND CLEARANCE: Support Structure Maximum* ceiling clearance 108” at 31” hood mounting height above Upper Exhaust Duct Cover countertop/ stove (may vary with a different model). Chimney extensions must be purchased for higher ceiling. Lower Exhaust Duct Cover Range Hood Min: 28”...
-
Page 8: Electrical Requirements
• Use no more than three 90° elbows. • Make sure there is a minimum of 24” (61 cm) of straight vent between the elbows if more than one elbow is used. • DO NOT install two elbows together. • The length of the vent system and number of elbows should be kept to a minimum to provide efficient performance. -
Page 9: Installation Instructions
INSTALLATION INSTRUCTIONS PREPARE LOCATION: • It is recommended for the vent system to be installed before hood is installed. • Before making cutouts, make sure there is proper clearance within the ceiling for the exhaust vent. • Disconnect the power. •... -
Page 10: Venting Methods
VENTING METHODS: • This range hood is factory set for venting through the roof or wall. • Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed. Option 1: Vertical roof venting Option 2: Horizontal wall venting ADVANCED PREPARATION: NOTE: To avoid damage to your hood, prevent debris from entering the vent opening. -
Page 11: Install The Range Hood
INSTALL THE RANGE HOOD: 1. Align upper support frame (Part D) with holes in the ceiling. Mount the upper support frame to the ceiling using four frame screws (Part H) (for sheet rock only). Ensure that the upper support frame is securely fastened to the joist or support in the ceiling. Attach support frame to ceiling using anchors recommended for your type of ceiling: •... - Page 12 6. Slide up the upper exhaust duct cover ( Part B) over the completed Slide up and secure support frame on the ceiling and upper exhaust duct fasten with two upper support cover frame bolts (Part M) to the upper support frame.
- Page 13 Instalation Overview NOTE: • screws are designed for dry wall. Not to be used with any other types of wall. • A distance of 28” to 31” is recommended* between stove top and the bottom of the range hood. • Always use first and second holes on the support frame extensions to secure lower support frame.
-
Page 14: Range Hood Use
RANGE HOOD USE RANGE HOOD CONTROLS: 00:00 Remote Clock/ Lights Digital Minus Plus Power Control Timer On/Off Display Touch Touch On/Off Sensor Button Button OPERATING THE RANGE HOOD: - To Turn the Fan ON press the Power Button and press the “+” button to increase the fan speed: •... -
Page 15: Range Hood Care
REMOTE CONTROL: Power Lights On/Off On/Off Sensor - selected models only Decrease Increase Fan Speed Fan Speed Timer RANGE HOOD CARE WARNING: To reduce the risk of electrical shock, DO NOT clean the hood while it's operating. WARNING: Never put your hands into the area housing the fan when the fan is operating. - Page 16 Stainless Steel Baffle Filters: - Filters should be cleaned frequently (every two months of operation, or more frequently for heavy use). 1. Remove all the parts mentioned above from the hood and discard oil and residue. 2. Wash the filters in the dishwasher, or soak in hot or warm water with dish detergent for half an hour, then wipe the filters clean.
-
Page 17: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Check if the range hood has been plugged in, make sure that all power has been turned back ON, fuse not blown and all electrical wiring are properly con- If the range hood or LED light nected. -
Page 18: Specifications
SPECIFICATIONS Power: 120V/60Hz Dimensions: 29.5in 20in 16in Weight: Hood - 48.4lbs Exhaust Duct Cover - 9lbs Baffle Filter size: 9.2” x 15.2”... - Page 19 RHI-3086 (30in): Body Stainless Steel Power Rating 120V/60Hz (USA & Canada standard) General Input Power 230W (218W+12W) Levels Of Speed Control 4 Levels Noise Level (dB / sone) Approximately 23 / 0.3 to 68 / 7.0 (Lowest to highest Speed)
- Page 20 S W E D E N Your purchase comes with a 100% satisfaction guarantee from Janska If you are not happy with the product for any reason, please contact us at support@janskaus.com with your feedback or questions, and we will do our best to make...