Advertisement
DUCATI
DESMOSEDICI
CHARGING THE BATTERY PACK S087
(Battery and Charger are not included in the kit. FERRE RØRER)
a. Once the battery is ready to be charged, first plug the AC quick-charger into the AC power source outlet, and then connect
the battery input/output harness to the charger.
b. Always monitor the battery during charging. As soon as the battery is fully charged, disconnect the battery from the
charger plug (over-charging or charging incorrectly using inadequate chargers may cause the battery pack to become
dangerously hot).
c. Ensure the battery pack is completely discharged prior to charging. Discharge the battery pack by either running the
electric motor until it slows down or use a discharger (not included).
d. For best results, let the battery pack cool before charging. Heat may prevent the battery pack from charging to full
capacity and also decreases the performance of the battery.
a.
BRS SARS eo
ae SME
ERR WEA
o
b. TEBRPRTERUONER
°
POREZNI SER TES SHOR el ©
WEAN SMS
CRS R
SRE Pap IDAMAN
» US
ME mA
> BREE o
c. & TERI ROTTEN
HES CETENE ° PSORME RE : TASTIER
ASRS SNH SMBs asl
BW) °
d. rrena CREME
SPAR
aIe HEIRS
RSA
EOS WES MERTE
> LERS TSMR
WIEBE
PREPARING THE CHASSIS
#2/'FBl > Ee is
a. Remove the tank/seat and rider from the chassis.
b. Straighten antenna with a screwdriver so it is easier to insert into antenna tube.
c. Slide the antenna wire through the antenna pipe. (Do not cut or shorten antenna wire!) Push the antenna pipe into the
chassis mount hole.
a.
ERARE EELT
e
b. FUAR RARE S RERE
> DIERRE
ERIRE
°
c. HARESLRR
EME SLE (BDRIGARLA RAR EERE) ©
Advertisement
