Hill Start Control - BMW S 1000 XR 2022 Rider's Manual

gearshift with the Pro shift
assistant can take place. When
shifting gears with the Gear
Shift Assistant Pro, the rider
has to keep load state (throttle
twistgrip position) constant
before and during the gearshift.
A change in the position of
the throttle twistgrip during
a gearshift can cause the
function to abort and/or lead
to a missed shift. Gear Shift
Assistant Pro provides no
assistance for the gearshift if
the rider declutches.
Downshifting
Downshifting is assisted until
maximum rpm for the tar-
get gear to be selected is
reached. This prevents over-
revving.
Maximum engine speed
max 12000 min
with power reduction
max 12000 min
Upshifting
The shift assistant provides
no assistance if engine speed
drops below idle during an
upshift.
-1
OE
-1
Idle speed
1270 ±50 min
regular operating temperat-
ure)

HILL START CONTROL

Function
Hill Start Control is a pullaway
assistant that operates on the
partially integral ABS system to
prevent the vehicle from rolling
back on a gradient, without
the rider having to keep pres-
sure applied to the brake lever.
When Hill Start Control is ac-
tivated, pressure is built up in
the rear brake system to keep
the machine at a standstill on a
gradient.
The brake pressure in the
brake system is dependent on
the gradient.
Effect of an incline on brake
pressure and drive-off
behaviour
If the motorcycle is stopped
on a gentle incline, only low
brake pressure is built up.
In this case, the brakes are
quickly released when driv-
ing off. The motorcycle can
be moved off more gently. It
167
-1 (Engine at