Panasonic Omnivision PVQ-M2509 Operating Instructions Manual page 10

Combination vcr
Hide thumbs Also See for Omnivision PVQ-M2509:
Table of Contents

Advertisement

IA check list before you begin.
C] All connections are made (see page 5.)
C] Your Combination VCR is plugged in.
Insert a cassette.
+ Combination VCR power
comes on automatically.
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
SA
A
PLAY
Press PLAY.
* Playback begins automatically
if cassette has no record tab.
E To Find a Particular Scene
Forward Search > Press FF
Reverse Search 3 Press REW
E For view Slow Motion >
Press SLOW (To release, press SLOW)
E For view Still (Freeze) picture >
Press PAUSE (To release, press PAUSE)
@ For view Frame by Frame picture >
Press SLOW in the Still mode
(To release, press PAUSE)
After Combination VCR is in Still or Slow mode for 3 minutes, it
will switch to Stop mode automatically to protect the tape and
the video head.
@ To stop > Press STOP
E To rewind tape > Press REW in stop mode
E To eject tape > Press STOP/EJECT on the
Combination VCR
Features for Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking
Control (to reduce
picture noise
Use during Playback and Slow Motion mode to reduce
picture noise.
Press the 3 or 6 NUMBERED key on the remote control
or CHAY on the Combination VCR until the picture
clears up.
To return to Auto Tracking, press POWER off, then on
again a few seconds later.
PanaBlack™ Picture Tube
This Combination VCR uses a PanaBlack™ picture
Se
tube for better color reproduction and picture contrast.
A
A
OA
a
10
For assistance, call 1-800-211-PANA(7262)
You can operate on the Combination
VCR
1 Insert a cassette.
2 Press PLAY.
ii Lilo»!
e
a
y
4
= SE
"OO Ceol
| Æ Press to stop and/or eject tape.

Advertisement

Table of Contents
loading

Table of Contents