Table of Contents
Advertisement
Direct Access
(For Normal and/or Timer recordings)
Go directly to the desired recording.
INDEX
Display INDEX screen.
0)
Press INDEX in Playback or
A
se
Stop mode.
e If there are no Timer Recordings
on the Program Index List, go to
step 3.
INDEX
Display INDEX screen.
a
ere
1) Press AV to
select "INDEX
SELECT: à Y KEY
SEARCH.
END _: INDEX KEY
2) Press P to
display.
* This screen appears
only if there are
Timer Recordings.
Select the recording
number.
© O O | Press
© O O | NUMBERED
© © © | keys.
©
* To calculate number,
see below.
3
INDEX
Start search.
Press FF or REW.
-+ When search is
finished, playback
begins.
INDEX
SEARCH
04
To calculate the Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2, enter
3 in step "3" and press REW.
A
112
[fs[4[s]
e [7]
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step "3" and press FF.
e A
A.
y
alè
jaļlalļjs|
e J7]
NOTE: y indicates start points of each recording.
VHS Index Search System is ...
Each time recording is made, an
invisible index mark is placed on the
tape. When timer recordings are made,
program index and information are aiso
included. These index marks can be
used to access or scan recordings.
> :VOL UP
3 NUMBERED
keys
1 INDEX
4 FF or REW
e Make each entry within 10 seconds, or
the Index Search mode will be canceled.
« If these VHS Index Search Systems are
Started very close to an index mark, that
index mark may not be counted in the
search.
20
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
