(Stereo/Sap/Mono Broadcast, Select Audio Mode) - Panasonic Omnivision PV-7200 Operating Instructions Manual

MTS Broadcast/ VHS Hi-Fi Stereo System
(For Model PV-7450 only)
IA check list before you begin
The VCR is connected to a stereo TV, or a mono TV and an external stereo amp or receiver with speakers.
O The VCR and other components are plugged in and turned on.
Connections —
to Make n from Antenna
Mono
TV
Stereo AMP
or Receiver
When recording, you may monitor in stereo, =
by connecting the VCR to either a stereo TV, Receivab le B road cast Types
or a mono sound TV with an external stereo
: liowi i i nd o n - isplays.
amp and speakers.
The following are possible audio broadcast types and on-screen displays
Parenthesis indicate signal(s) not being received. The arrow indicates the
selected audio mode.
Push DISPLAY to display the broadcast
E om} signal currently being received.
M tereo and S. broadcast STOP 12:00AM CHO8
Multi-channel Television Sound Stereo 0:00 sip
(main language) and Secondary Audio aor
Program (sub language) broadcasts are MONO
being received simultaneously. Select
STEREO or SAP audio mode.
MTS Stereo broadcast is 0:00:00
Multi-channel Television Sound Stereo STEREO 4
broadcast. Select STEREO audio mode. ROND
* If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
STOP 12:00AM CHO8
0:00:00
SAP br adcast (STEREO) SLP
Secondary Audio Program (sub language) MONO ^
broadcast. Select SAP audio mode for the
sub language.
Equipped with dbx" -TV Noise Reduction
for true MTS reproduction. dbx" -Tv
Noise Reduction is required for good
stereo separation and audio fidelity.
dbx? is a registered trademark, and is
licensed by dhx? Technology Licensing.
22
STOP 12:00AM CHO08
0:00:00
MONO broadcast
Normal monaural sound broadcast.