Jabra Engage 55 Quick Start Manual

Jabra Engage 55 - USB-C UC Mono
I pressed and held the Jabra Link 400 button while connecting
it to the USB port and now the headset is not reconnecting.
What should I do?
The Link 400 has inadvertently been reset. You will need to re-pair the
headset with the Link 400.
To manually pair an Engage headset with the Link 400, use either
wireless pairing or cabled pairing. If there are other headsets in the area,
and there is a risk of accidentally pairing with another headset, we
recommend using cabled pairing.
Wireless pairing
1. Plug the Link 400 into a USB port on the computer.
2. Turn off the headset (press and hold the Call button until the LED
flashes red and the headset turns off).
3. Press and hold the Call button on the headset until the LED flashes
blue.
4. Press and hold (1-2 seconds) the button on the Link 400 to pair it
with the headset.
https://www.fr.mea.jabra.com/supportpages/jabra-engage-55/9553-430-
111/faq/231e4267-157d-4275-a1d3-e7516fb8c347
10/03/2024 12:23
Page 1 de 4