Jabra Engage 55 - USB-C MS Mono Quick Start Manual

Jabra Engage 55 - USB-C MS Mono
How do I manually pair a Jabra Engage headset with the Jabra
Link 400?
If the Engage headset was purchased in a bundle with the Link 400 DECT
adapter, they come already pre-paired.
To manually pair an Engage headset with the Link 400, use either
wireless pairing or cabled pairing. If there are other headsets in the area,
and there is a risk of accidentally pairing with another headset, we
recommend using cabled pairing.
Wireless pairing
1. Plug the Link 400 into a USB port on the computer.
2. Turn off the headset (press and hold the Call button until the LED
flashes red and the headset turns off).
3. Press and hold the Call button on the headset until the LED flashes
blue.
4. Press and hold (1-2 seconds) the button on the Link 400 to pair it
with the headset.
https://www.mea.jabra.com/supportpages/jabra-engage-55/9553-470-
111/faq/661a3222-cb5a-4c73-b509-7a94441a8e4b
01/03/2024 00:53
Page 1 of 4