Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (status indicator
is blinking rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by product specific pairing mode steps until example of indicator.
Add device through network
1.
Once registered, tap Add Device
right corner, to add a new device through the network.
2.
Select the product type from the list of options in the app (Home Security >
Camera).
3.
Ensure that the device is in pairing mode, with the status indicator is blinking
rapidly
4.
Enter your Wi-Fi details. It is important that your SmarterHome
app are connected to the same Wi-Fi network during setup.
Notes:
•
The device and the app have to use the same Wi-Fi network.
•
The device is only compatible with 2.4Ghz networks.
•
Depending on the product, Steps 3 and 4 may be in opposite order.
Next
, or the +
device and the
7
Advertisement
