Table of Contents
Advertisement
I. DISASSEMBLY
In case of trouble, etc. necessitating dismantling, please
dismantle in the order shown in the photographs.
Reassemble in reverse order.
1. Removal of UPPER COVER
UPPER
COVER
2. Removal of FRONT
PANEL
* Remove the LID PANEL first then remove the
FRONT PANEL. (Turn on the Power and press
the EDJECT button.)
i
Bea
PANEL
SERVICE MANUAL
ll. CONTROLS
@ Power switch
To turn ON and OFF the power.
Q
Cassette lid and cassette holder
(Power assisted)
Load
a cassette
tape here. To open,
press
the
STOP/EJECT button. To close, press once again.
Do not manually open this cassette holder, as it may
damage your equipment.
FL (Fluorescent) Display
Tells you what the cassette deck is doine
COUNTER
RESET button
To reset the digital counter to "00.00".
IPSS buttton
To select playback with the IPSS system.
A-—- B MEMORY
button
For memorization of a selection(s) or part of a selec-
tion that you wish to hear repeatedly. Also used with
Operating buttons
For playback and recording operations.
Press the STOP/EJECT
button to open and close
the cassette holder.
MPX (Multiplex) FILTER switch
To turn on and off the multiplex filter.
Noise reduction selector (NR OFF, DOLBY B
and DOLBY C)
To select noise reduction for recording and playback
purposes.
REC LEVEL control
To set recording levels. The level adjustment is the
same amount for both right and left channels.
REC BALANCE control
To set the left and right channel balance of recording
input levels.
BIAS control
To set the recording bias current. The bias adjust-
ment range
is between
—20%
and + 20% of the
proper bias current of each tape position. If using a
reference
tape
recommended
for use
with
the
cassette deck, set this control to the center click "0"
position.
PHONES
LEVEL control
To adjust the output level of the PHONES jack.
TIMER START Switch
For absentee recording and timed playback.
PHONES
jack
To listen through a pair of headphones,
connect
them to this jack.
s3e@e
©6060
909090080
@
@
FL (Fluorescent) Display
——-
FILTER, Dolby B and Dolby C Displays
_— Tape position Displays (NORM, CrO, and METAL)
/
/
IPSS Display
/
Peak Level Meter and
'
Recording level guide (Dots)
/
Digital Tape Counter
and
Deck
Mode
Displays
Program Number Display
Advertisement
Table of Contents
