Table of Contents
Advertisement
Storing the station names
— Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
disi:lay. You can store up to eight characters
for a station.
Storing the station names
1 Tune in a station whose name you want
to store.
2 Press
for two seconds.
PME
Ss eS =:
105.7
3 Enter the characters.
@ Rotate the dial in a clockwise
direction to select the desired
characters.
(A>
B+
C+.
Z+0+-
14-24
«QO —> + —> 2
+ *
+ f+
\
oo
—+.—_)
a
|
185.7
If you rotate the dial ina
counterclockwise direction, the
characters appear in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
@ Press
(-+) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press C1) (+~), the flashing cursor
moves to the left.
© Repeat steps @ and @ to enter the
entire name.
4 To return to the normal radio reception,
press
for two seconds.
Tip
To erasefcorrect a name, enter "_" (under-bar) for each
character.
Displaying the station name
Press
during radio reception.
FMI
= WRKISS
105.7
Each time you press (DSPL), the item
changes as follows:
Station name* «+ Clock
* If the station name is not stored, "NO Name"
appears in the display for one second.
Erasing the station name
1 Tune in any station and press
for
two seconds.
2 Press
for two seconds.
"Delete" and the station name appear in the
display.
3 Rotate the dial to select the name that
you want to erase.
4 Press CS) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5 Press
(LIST)
for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
frequency and name
— tist-up
You can search for the memorized stations
_ names in the display.
1 Press
momentarily.
The frequency or the name assigned to the
station currently receiving appears in the
display.
\ LST 1PWRKISS
2 WRPOWER
2 Press
repeatedly until you find the
desired station.
3 Press CG) (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode.
To go back to the normal mode, press COSPL).
an
2]
Advertisement
Table of Contents
