Table of Contents
Advertisement
Clean the print head deeply.
Step 4
After cleaning the print head deeply, print the nozzle check pattern and check the result.
• From the printer
•
Deep Print Head Cleaning
If it does not improve, turn off the printer, wait for more than 24 hours without unplugging the power supply, and go to the next step.
Clean the print head deeply again.
Step 5
After cleaning the print head deeply again, print the nozzle check pattern and check the result.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see
Is Faint or
Uneven.
When using paper with one printable surface, check the correct printable side
Check 3
of the paper.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
When you load paper on the rear tray, load paper with the printable side facing up. When you load paper in the
cassette, load paper with the printable side facing down.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
If the ink still does not come out.
Check 4
Perform Replace Ink in Print Head
Note
• Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is
•
printed correctly.
397
If Printing
Advertisement
Table of Contents
