Pioneer LaserDisc CLD-D501 Operating Instructions Manual page 13

SYSTEM REMOTE CONTROL CONNECTION
CONNECTIONS
WHEN COMBINED WITH OPTIONAL PIONEER
PROJECTION MONITOR (or COMPONENT
DISPLAY)
Connect the VIDEO OUT jack of the player to the video
input jack of the projection monitor (or component dis-
play), and connect the AUDIO OUT jacks of the player
to the audio input jacks of the projection monitor (or com-
ponent display).
System Control
By connecting the CONTROL IN jack of the player to the
remote jack of the projection monitor (or component dis-
play), the system can be controlled by the remote con-
trol unit of the player at the remote controi sensor of the
projection monitor (or component display).
® Use a commercially available cord with mini-plugs
(without load) for the connection.
Please also refer to the operating instructions for the
projection monitor (or component display).
=
Video cord
CLD-D501
CLD-D550
Hi-Fi Projection Display SEED
VIDEO VIDEO tIVIDEOS
'DISe 0 1iVIDEO:
NOTE:
When system controf connections have been made, the
player cannot be directly controlled by the remote con-
trol unit. To operate the player, aim the remote controf
unit at the projection monitor (or component display).
Audio cord
(
Commerciaily available
cord with mini-plugs
{without load)
Stereo amplifier
13
<VRB1067>