Table of Contents
Advertisement
Suunto Spartan Sport Wrist HR Baro
The declination value appears on most maps. The location of magnetic north changes yearly,
so the most accurate and up-to-date declination value can be found from websites such as
www.magnetic-declination.com).
Orienteering maps, however, are drawn in relation to magnetic north. If you are using an
orienteering map, you need to turn the declination correction off by setting the declination
value to 0 degrees.
You can set your declination value from the settings under Navigation » Declination.
3.9. Device info
You can check details of your watch software and hardware from the settings under General »
About.
3.10. Display theme
To increase the readability of your watch screen while exercising or navigating, you can
change between light and dark themes.
With the light theme, the display background is light and the numbers dark.
With the dark theme, the contrast is reverse, with the background dark and the numbers light.
The theme is a global setting that you can change in your watch from any of your sport mode
options.
To change display theme in sport mode options:
1. Go to any sport mode and swipe up or press the lower button to open the sport mode
options.
2. Scroll down to Theme and press the middle button.
3. Switch between Light and Dark by swiping up or down or by pressing the upper and lower
buttons, and accept with the middle button.
4. Scroll back up to exit the sport mode options, and start (or exit) the sport mode.
3.11. Do Not Disturb mode
The Do Not Disturb mode is a setting that mutes all sounds and vibrations, making it a very
useful option when wearing the watch in, for example, a theater or any environment where
you want the watch to operate as usual, but silently.
The Do Not Disturb mode also prevents the watch from going into hibernation after a period
of inactivity. So, you can enable this setting along with Daily HR (see 3.1.2. Daily HR) to get
heart rate tracking when you wear your watch while sleeping.
To turn on the Do Not Disturb mode:
1. From the watch face, keep the middle button pressed to open the shortcuts menu.
2. Swipe up or press the lower button to scroll down to the Do Not Disturb mode.
3. Tap the screen or press the middle button to confirm your selection.
19
Advertisement
Table of Contents
