Table of Contents
Advertisement
Available languages
Available languages
Operations
Optional Fliter
If you installed the Optional Filter to prevent dust accumulation on the heat exchanger, use this setting to
set the filter cleaning alert on or off.
1. Tap
.
2. Turn the Navigation dial to select Optional Fliter, and then tap
3. Tap
to select On or Off.
-
Select On to receive a filter cleaning alert message.
NOTE
If the "Remove optional filter to clean", "Clean heat exchanger & tap
filter & tap
" message appears on the display, clean both the heat exchanger and the Optional Fliter.
(Refer to the "Heat exchanger" section on page 45 and "Micro soft filter (Optional Filter)" section on page
48.)
Child Lock
To prevent children or infants from accidentally starting or setting the dryer, Child Lock locks all buttons
except for
and
.
1. Close the door.
2. Tap
.
3. Turn the Navigation dial to select Child Lock, and then tap
4. Tap
to select On or Off.
-
The Child Lock
-
You cannot turn on Child Lock with the door open. If you get the "Close the dryer door and try again"
message on the display while you try to turn on Child Lock, close the door and try again.
NOTE
• When Child Lock is on, all buttons are disabled except for
• If you open and close the door with Child Lock on, an alarm triggers with the "Open door & check inside"
and "Child Lock on" message.
• If you tap a button with Child Lock on, an alarm triggers with the "Child Lock on" message.
• To dismiss a notification message, turn off Child Lock or the power.
34
English
Untitled-2 34
icon turns on when the function is on.
.
" or "Clean heat exchanger optional
.
and
.
2023-07-18
5:11:14
Advertisement
Table of Contents
